Low power mode of SN65DSI85

Jack Huang1

Other Parts Discussed in Thread: SN65DSI85

Hi all,

I'm working with SN65DSI85 to output LVDS signal. It did work, but I want to know there is a way to let this IC entering low power mode and does not clear the CSRs.

So I see the ULPS in the datasheet, but how can I turn it on with Tegra 4 platform?

With Regards,

Jack

over 12 years ago

0 Elias Villegas M. over 12 years ago

TI__Guru* 76130 points

Hello,

We are reviewing your question and we'll reply back soon.

Regards.

0 Yu-Ning Lee over 12 years ago

TI__Intellectual 1990 points

Hi Jack,

The Ultra Low Power State entry command should be issued per the mipi DPHY spec definition.

Please refer to the mini DPHY specification for the details of the ULPS entry and exit procedure.

Regards,

Yoon

Interface

Interface forum

Low power mode of SN65DSI85