Interface Camera Link to SRIO

Friedrich Schick

Other Parts Discussed in Thread: TMS320C6678

Hello,

I am looking for a way to interface the TI KeyStone TMS320C6678 directly to the Aptina MT9M021 image sensor. Since the TI KeyStone lacks a parallel camera interface, I am looking for another solution. The TMS320C6678 supports SRIO, is there an Serializer IC available, that bridges a camera interface 12bit + hsync + vsync + clk to SRIO 8b/10b or something compatible to the TMS320C6678? Or do you have any other idea how to get the images into the DSP.

TMS320C6678: http://www.ti.com/product/tms320c6678

KeyStone SRIO: http://www.ti.com/lit/ug/sprugw1b/sprugw1b.pdf

Aptina MT9M021: http://s1.archive.theimagingsource.com/publications/sensors-cmos/mt9m021/9634d1fe610cb1f446eb32401ffdab4f0cd67830c8cb45721f2d2ebc7a77de46/mt9m021.en_US.pdf

over 12 years ago

0 Elias Villegas M. over 12 years ago

TI__Guru* 76130 points

Hello,

Please take a look at the SN65LVDS324, it supports MT9M024

Regards.

0 Friedrich Schick over 12 years ago in reply to Elias Villegas M.

Prodigy 90 points

Hello Elias,

I am looking for CamLink to SRIO. Is it possible to simulate a FPD-Link III device using the SRIO controller of the KeyStone I/II devices?

Regards

Friedrich

0 Elias Villegas M. over 12 years ago in reply to Friedrich Schick

TI__Guru* 76130 points

Hello,

I have null bandwidth to answer questions regarding the keystone devices, you will have to post your question about the Keystone device at the following link http://e2e.ti.com/support/dsp/default.aspx

Regards.

Interface

Interface forum

Interface Camera Link to SRIO