Please Review about TMDS442 Schematic.

hisakichi kobayashi

Other Parts Discussed in Thread: TMDS442

Hi all.
Although TMDS442 was used by my customer, the phenomenon in which output operation from an A1x/B1x port to a Y2x/Z2x port cannot be performed has occurred.
Please a review TMDS442 Schematic for what is the cause by the attached circuit and setup table.
the level of an A1 x/B1x port is satisfactory.

Best Regards,
Hisa Kobayashi.

3463.HDMI-TMDS442.pdf

0576.Table_setup-SW.pdf

over 12 years ago

0 Elias Villegas M. over 12 years ago

TI__Guru* 76130 points

Hello,

We are reviewing the schematic and we'll reply soon.

Regards.

0 hisakichi kobayashi over 12 years ago in reply to Elias Villegas M.

Intellectual 950 points

Elias villegas all dear,

Thank you for the reply connection.
Although I feel sorry very much, There is a message from a customer and the circuit operated normally.
The cause of not operating, It was because the place whose connector of CN3 should be HDMI-TypeC was carried in the HDMI-TypeA connector.
Please be interrupted about a Schematic review.

I am sorry to obtain time.

Regards,
Hisa Kobayashi

Interface

Interface forum

Please Review about TMDS442 Schematic.