ISO1540 side1 and side2

Toshio Ushikubo

Mastermind 9620 points

Hello,

In the single master system, please advice if there are any restriction that master should be connecter side1 or side2.

Best Regards.

over 12 years ago

0 Chris Kraft over 12 years ago

TI__Intellectual 2020 points

Hi Toshio,

The datasheet is worded and the application diagram suggests that the master is connected to side1, but above all ensure that the logic levels (VOL and VIL/VIH) will work with your master and slaves in that configuration.

Regards,
Chris Kraft

0 Toshio Ushikubo over 12 years ago in reply to Chris Kraft

Mastermind 9620 points

Hello Chris-san,

Thank your answer.

Best Regards.

Interface

Interface forum

ISO1540 side1 and side2