DVI on Optical Application

Kwangil Koo

Other Parts Discussed in Thread: TFP410

Dear,,,,

I am considering the design a module for DVI Video Transmission through optical fiber.

Many related deices were searched and I got to draw the block diagram as below.

Many variants makes me confused. Please let me know this device selection is resonable and recommend the more appropriate devices.

Thanks and best regards,

K.I. Koo, ESSA Inc

over 11 years ago

0 Elias Villegas M. over 11 years ago

TI__Guru* 76130 points

Hello,

Why do you need to de-serialize the DVI signal and then serialize it again with the DS92 device?

Regards.

0 Kwangil Koo over 11 years ago in reply to Elias Villegas M.

Prodigy 110 points

I need to transmit the DVI video data from graphic controller to monitor through 2-3 km-long optical fiber. The reason why I serialized before transmit is to reduce the number of the physical channel.

Best Regards

ESSA

0 Elias Villegas M. over 11 years ago in reply to Kwangil Koo

TI__Guru* 76130 points

I can only comment on the TFP410 and I can tell you that the application is correct and feasible.

Here in this forum are people who can provide more support regarding the DS92 device.

Regards

Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

Interface

Interface forum

DVI on Optical Application