• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 33 subscribers
  • Views 432 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLK6201EA Rpu Rpd

John Lally
Intellectual 600 points
Other Parts Discussed in Thread: TLK6201EA

The following 2 questions pertain to part number TLK6201EA:

1.) What is the min & max resistance of the internal pull up resistors on DE0, DE1, & POL?

2.) What is the min & max resistance of the internal pull down resistors on DIS &  SWG?

Thanks,

-John

  • 0
    TI__Mastermind 20820 points

    Hi John,

    I am checking with a colleague of mine that helped design this part when it was released. I will update you when I have an answer.

    Regards,

    Mike

  • 0 in reply to Michael Peffers
    TI__Mastermind 20820 points

    Hi TG,

    I apologize for the delay on this, the designer of this part has been traveling and has been a little difficult to get a hold of.

    The resistor values are as follow:

    POL / DE – ~715kohm

    DIS / SWG – ~825kohm

    But it has some additional PU/PD resistors and the design needs to be opened up to verify what they are. I will ping the designer again today and see if has had a chance to open the design yet but I cannot comment on his time table because I think he is still traveling. I will post here again when I can confirm the resistor values.

    Is this post related to the newer post from TG yesterday? If so let please close this post out and I will follow up on the newer post for everybody, thank you!

    Regards,

    Mike