SN65HVD62　External Clock Input

Tomohiko Sugiyama

Please let me confirm some questions about External Clock Input mode.

When we use in the "External Clock Input mode" , Are there any conditions required in addition to the frequency ?
(An example is amplitude level.)

Best regards
Sugiyama

over 11 years ago

0 John Griffith over 11 years ago

TI__Mastermind 21769 points

Hi Sugiyama-san,

The XTAL pins have standard CMOS input thresholds of 0.7*Vcc and VIL of 0.3*Vcc. Please see the "Recommended Operating Conditions" table on page 4 of the datasheet.

Thanks,

John

0 Tomohiko Sugiyama over 11 years ago in reply to John Griffith

Intellectual 815 points

Hi John-san

Thank you for the Answer .

I will make sure the "Recommended Operating".

I appreciate your support and help so much.

Best Regards,
Sugiyama

Interface

Interface forum

SN65HVD62　External Clock Input

Interface

Interface forum

SN65HVD62 External Clock Input

SN65HVD62　External Clock Input