• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 431 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Questions about TLK3132 and TLK6002

Ivan Song
Expert 3145 points

Other Parts Discussed in Thread: TLK3132, TLK6002

Hi,Team,

I have some quesitons about the two serdes parts. Need you help.

1)Can TLK3132 work in different datarate for two channels?

2)Can TLK3132 support different datarate for Tx and Rx in same channel?

3)How to convert pre/post cursor(page47) in TLK6002 De-emphasis to dB?

Appreciate much for your comments.

Regards,

Ivan

  • 0
    TI__Mastermind 20820 points

    Hi Ivan, 

    1. Yes the data rates can be configured different on different channels of the TLK3132. Through the use of the PLL multiplier and rate bits the device can be configured differently.

    2. Yes the Tx and Rx can be configured for different rates. See Table 2-34 in the data sheet.

    3. I am still trying to track down this answer I will follow up with you when I can confirm an answer.

    Regards,

    Mike