TUSB8040A1 choke current

kerr chang

Other Parts Discussed in Thread: TUSB8040A1

Dear TI

We have use TUSB8040A1 in our system , We have EMI issue in USB2.0 signal , BTW , we have add choke in USB2.0 DP DM line. How about the choke minimum current ? SMSC is 27.7mA.

How about TI TUSB8040A1? we need check our choke spec.

over 12 years ago

0 Elias Villegas M. over 12 years ago

TI__Guru* 76130 points

Hello sorry for the delay,

We don't have a recommendation spec for an external component, what is the 27.7mA value of? Is it the input current of the smsc device or it is the maximum current supported by the choke?

Regards.

0 kerr chang over 12 years ago in reply to Elias Villegas M.

Genius 4075 points

Dear

The 27.7mA is SMSC DP and DP output current. so we need select chock current > 100mA

The customer worry chock will EOS

0 JMMN over 12 years ago in reply to kerr chang

TI__Guru 60870 points

Hi Kerr,

DP/DM lines are designed to sustain max DC current of ~40mA.

Regards,

JMMN

Interface

Interface forum

TUSB8040A1 choke current