DS110DF410: Difference between DS110DF410EVM and DS110DF410EVK?

Chuchen Wang

Other Parts Discussed in Thread: DS110DF410

Hello,

I see on the DS110DF410 product page that there is a EVM <http://www.ti.com/tool/ds110df410evm> and a EVK <http://www.ti.com/tool/ds110df410evk> both using the same user guide showing the same board.

What is the difference between the EVM and the EVK?

Best Regards,

Chuchen Wang

over 11 years ago

0 Michael Lu (Santa Clara) over 11 years ago

TI__Mastermind 29655 points

Hi Chuchen,

There is no difference in the actual module other than the naming convention.

When the original boards were developed under National Semiconductor, they took on the name EVK (Evaluation Kit), but they are now being changed to use the TI naming convention of EVM (Evaluation Module).

Thanks,

Michael

0 Chuchen Wang over 11 years ago in reply to Michael Lu (Santa Clara)

TI__Expert 3470 points

Hi Michael,

Thank you for your help and for the quick response! Does the product group plan on removing the EVK page? It's very confusing for the customer when we have a page for EVM and a page for EVK with both of them using the same user's guide.

Best Regards,

Chuchen Wang

0 Michael Lu (Santa Clara) over 11 years ago in reply to Chuchen Wang

TI__Mastermind 29655 points

Hi Chuchen,

Thanks for the feedback. We will work to clear up the confusion on our next revision.

Regards,

Michael

0 Chuchen Wang over 11 years ago in reply to Michael Lu (Santa Clara)

TI__Expert 3470 points

Thank you Michael!

Interface

Interface forum

DS110DF410: Difference between DS110DF410EVM and DS110DF410EVK?