TMDS442 / source plug-in status register

K.Yaita

Guru 29720 points

Other Parts Discussed in Thread: TMDS442

Hi,

I have basic question about TMDS442.

Is "Source Plug-In Status Register" read only?

I think it isn't configuration register and read only, but want to be checked just in case.

Best Regards,

Yaita

0 K.Yaita over 11 years ago

Guru 29720 points

Could you follow me please?

0 Elias Villegas M. over 11 years ago

Hello,

Yes, it is read-only.

Regards.

0 K.Yaita over 11 years ago in reply to Elias Villegas M.

Guru 29720 points

Hello ELIAS-san,

Thank you for your reply.

I have additional question.

If Plug-In Status Register is read only, which conditions 5V_EN[bit4] be changed?

Best Regards,

Yaita

0 Elias Villegas M. over 11 years ago in reply to K.Yaita

Hello,

Bits SP and 5V_EN are R/W.

Bits 5V_PWRn are read-only.

Regards.

0 K.Yaita over 11 years ago in reply to Elias Villegas M.

Guru 29720 points

Elias-san,

Thank you! I understood.

I appreciated for your support.

Best Regards,

Yaita

Interface forum