ds80pci102 info how to start it

Kamal Najmi

Other Parts Discussed in Thread: DS80PCI102, DS80PCI102EVK, ALP

hi,

My customer would like a tool or documentation to start the DS80PCI102, do we have something corresponding to that question?

Thank you

Kamal

over 11 years ago

0 Kamal Najmi over 11 years ago

TI__Expert 3435 points

Actually my customer would like a tool to check the register and initialize them.

Do we have a sort TOOL?

Regards,

Kamal

0 Michael Lu (Santa Clara) over 11 years ago in reply to Kamal Najmi

TI__Mastermind 29655 points

Hi Kamal,

Do you by chance have a DS80PCI102EVK board available for eval?

First, please check out the DS80PCI102 datasheet and DS80PCI102EVK documentation for information about how to set up the device in SMBus slave mode so that you can access the registers.

If you are searching for a particular tool to check registers and perform R/W operations, you can start by connecting a SPA dongle's SDA/SCL/GND pins to the corresponding SDA/SCL/GND pins of the DS80PCI102 and then controlling the device with ALP (Analog Launchpad).

Thanks,

Michael

0 Kamal Najmi over 11 years ago in reply to Michael Lu (Santa Clara)

TI__Expert 3435 points

hi,
yes my customer have already an eval board.

how can we get this SPA dongle?

Regards

Kamal

0 Michael Lu (Santa Clara) over 11 years ago in reply to Kamal Najmi

TI__Mastermind 29655 points

Discussion taken and resolved offline.

Interface

Interface forum

ds80pci102 info how to start it