TUSB1310A – Recommended FPGA

Hide

Guru 21045 points

Other Parts Discussed in Thread: TUSB1310A

Hi,

Could you please send us it, if you have the recommended FPGA list?

I understood that the Virtex-5 of Xilinx is recommended.

http://www.ti.com/lit/an/sllu123/sllu123.pdf

However, we would like to ask other FPGA.

For example, Virtex-7 and Spartan-6 etc…

Regards,

Kanemaru

over 11 years ago

0 Diego Cortes over 11 years ago

TI__Mastermind 36085 points

Hello Kanemaru-san,

We do not have a recommended FPGAs list, the only thing we provide are the characteristics of the TUSB1310A's ULPI and PIPE interfaces, please use them as guidelines, as well as the specification documents for PIPE and ULPI.

Best regards,

Diego.

0 Elias Villegas M. over 11 years ago

TI__Guru* 76130 points

The I/Os should support 250MHz

Regards.

0 Hide over 11 years ago in reply to Elias Villegas M.

Guru 21045 points

Hi Diego-san, Elias-san

Thank you for the information.

I apologize, I have one more question.

Could you please let me know the proven FPGA with TUSB1310A , if you have the information?

I‘m looking forward to your reply.

Regards,

Kanemaru

0 Elias Villegas M. over 11 years ago in reply to Hide

TI__Guru* 76130 points

I know a vendor uses a Virtex 4 with the TUSB1310A, the HAPS -31 platform.

Regards.

0 Hide over 11 years ago in reply to Elias Villegas M.

Guru 21045 points

Hi Elias-san

Thank you for the information.

Ｉ understood. thank you very much.

Regards,

Kanemaru

Interface

Interface forum

TUSB1310A – Recommended FPGA