AM26LS31 and AM26LV32

NAOKI AOYAMA

Guru 11215 points

Other Parts Discussed in Thread: AM26LS31, AM26LV32

Hello,

My customer wants to transmit a signal from 5V operation circuit board to 3.3V operation circuit board.

He try to use the AM26LS31 for 5V driver and the AM26LV32 for 3.3V receiver.

Is it possible to connect directly the AM26LS31 with the AM26LV32?

Regards,

Naoki Aoyama

0 Thomas Kugelstadt over 11 years ago

Yes it is possible as long as the difference between the ground potentials of the two devices does not exceed +/-7V.

regards, Thomas

0 NAOKI AOYAMA over 11 years ago in reply to Thomas Kugelstadt

Guru 11215 points

Hi Thomas

Thank you very much for your fast reply.

I feedback to my customer your information.

Thanks.

Naoki

Interface forum