TLK105

Ryuji

Guru 20090 points

Other Parts Discussed in Thread: TLK105

Hello,

TLK105 has hardware reset and software reset function.

Is there possibility the reset function of TLK105 becomes invalid depending on the condition?(for example, test mode in production)

I am concerned that the reset function is disabled due to some effect.

Best Regards,

Ryuji Asaka

over 11 years ago

0 Patrick OFarrell over 11 years ago

TI__Mastermind 31600 points

The reset functionality should be tested as part of production test. I am not aware of a condition where this functionality would become invalid under normal handling and typical circumstances.

Are you seeing issues in an application? If so, could you describe them?

Patrick

0 Ryuji over 11 years ago in reply to Patrick OFarrell

Guru 20090 points

Hello Patrick san,

Thank you for the reply. I understood. I have not seeing issues.

Best Regards,

Ryuji Asaka

Interface

Interface forum

TLK105