There are some intermittent failures when connecting 10 boards to the SN65MLVD205AD MLVDS bus via a 4 foot cable. The device common-mode value drops out of the acceptable range when the device is enabled. A screenshot is shown below.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
There are some intermittent failures when connecting 10 boards to the SN65MLVD205AD MLVDS bus via a 4 foot cable. The device common-mode value drops out of the acceptable range when the device is enabled. A screenshot is shown below.
Hi Adam,
Can you please be a little bit more descriptive regarding your issue? You say this is intermittent, how often have you seen the problem?