tusb1310 first generation

Chuck Beam

Other Parts Discussed in Thread: TUSB1310

The errata sheet for the tusb1310 describes a problem with the first generation part involving false unlock indications from the PLL. Could you please describe the operational symptoms this problem would typically cause? We are using this device with a 25 MHz clock.

over 11 years ago

0 Elias Villegas M. over 11 years ago

TI__Guru* 76130 points

Hello,

The false unlock will set an internal bit and cause the tusb1310 to require a hardware reset to recover.

Regards.

0 Chuck Beam over 11 years ago in reply to Elias Villegas M.

Prodigy 110 points

Just for clarification.......When the false unlock occurs and sets the internal bit, does the tusb1310 drop communications, and therefore requires a hardware reset to recover?

Thank-you.

0 Elias Villegas M. over 11 years ago in reply to Chuck Beam

TI__Guru* 76130 points

Correct, that is a possibility.

Regards

Interface

Interface forum

tusb1310 first generation