DS34RT5110 - Simulation model

Kawai

Guru 19785 points

Other Parts Discussed in Thread: DS34RT5110

Hi Team,

Our customer requests us the simulation model for DS34RT5110.

Could you please provide us the IBIS-AMI model ?

Best Regards,
Kawai

over 11 years ago

0 Michael Lu (Santa Clara) over 11 years ago

TI__Mastermind 29655 points

Hi Kawai-san,

I have checked through our database and am unable to locate an IBIS-AMI model for this part. Sorry for the inconvenience.

Thanks,

Michael

0 Kawai over 11 years ago in reply to Michael Lu (Santa Clara)

Guru 19785 points

Hi Michael-san,

Thank you for the information.

I understood that there is no simulation model for this device. Is the status same to the HDMI Repeater/Retimer family ?

Best Regards,
Kawai

0 Nasser Mohammadi over 11 years ago in reply to Kawai

TI__Guru* 93670 points

Hi Kawai-San,

IBIS/AMI is not available but we do have HSpice model. Would this be ok? Please send me email to send you this model since we need to have NDA in place.

Regards,,nasser

0 Kawai over 11 years ago in reply to Nasser Mohammadi

Guru 19785 points

Hi Nasser-san,

I apologize for my delay. Thank you very much for the information.

Our customer had already started designing the PCB without simulation. They will take care controlling the characteristic impedance on the board.

I will ask you at the timing when HSpice model must be needed.

Best Regards,
Kawai

0 Arseniy Mukhin over 9 years ago in reply to Nasser Mohammadi

Prodigy 20 points

Hi, Nasser!

Could you send me HSpice model of ds34rt5100? email: am31101990@gmail.com.

Best Regards,
Arseniy

0 Michael Lu (Santa Clara) over 9 years ago in reply to Arseniy Mukhin

TI__Mastermind 29655 points

Hi Arseniy,

In order to provide you with the HSPICE model for the DS34RT5110, we will need to set up an NDA with you. Do you have a local TI contact that we can contact to work on this for you?

Michael

Interface

Interface forum

DS34RT5110 - Simulation model