• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 1003 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

XIO2213B and XIO2213A windows XP driver

Kai Hsiao
Guru 12675 points

Other Parts Discussed in Thread: XIO2213B

Dear Sir

We are using XIO2213ZAY EVM to test

When I use my computer to verify this EVM in Windows XP SP3 OS ,The system management will show the yellow mark

Please refer to below figure and give the recommend to me ,Thanks

  • 0
    TI__Guru* 76130 points

    Hello,

    The XIo2213B does not require any special driver.

    It uses two drivers, the PCI-to-PCI-Bridge driver and the 1394 OHCI driver, windows xp should have built in support for those two drivers.

    Try disabling/uninstalling the device and re-installing the driver.

    Have you tried in another system?

    Do you have another 1394 card to test?

    Regards.