• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 32 subscribers
  • Views 485 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TUSB2077A register details and settings

Former Member
Former Member

Other Parts Discussed in Thread: TUSB2077A, TUSB8040A1

For the TUSB2077A, where can I find information/documentation/description on the device registers, settings and how to access them?  For example, how do you disable one of the seven downstream ports?

Thanks,
Brian

  • 0
    TI__Mastermind 18655 points

    Hello Brian,

    The TUSB2077A has no such feature. Take a look at the TUSB8040A1. It supports up to four downstream ports and may be configured to report one to four downstream ports by pin selection or by an attached EEPROM or SMBus controller.

    Regards.

  • Former Member
    0 Former Member in reply to Joel Jimenez0

    Thanks Joel, appreciate the quick response.  So, I assume the TUSB2077A has no configuration register settings, correct?  Rather, there are pin/terminal settings for these items, please confirm I am correct:

    BUSPWR selects either the bus-powered or self-powered mode

    EXTMEM enables or disables the optional EEPROM interface. No external memory uses default generic vendor and product IDs (VID and PID) or using external memory allows user to define VID and PID.

    MODE pin selects between 6-MHz or 48-MHz clock source

    Thanks,
    Brian