DS125DF111 / Programming Guide

Toshiyuki

Mastermind 7075 points

Other Parts Discussed in Thread: DS125DF111

Hi,

Our customer is considering DS125DF111 for their system.

Is there reference manual for register configuration ?

Customer would like to know recommended configuration procedure.

For example

・Data rate;OUT1f [11.270089Gbps] configuration procedure

・how to use registers for changing OUT1f [11.270089Gbps] to 10GbE[10.31G]

Best Regards,

Kato

over 11 years ago

0 Michael Lu (Santa Clara) over 11 years ago

TI__Mastermind 29655 points

Hi Kato-san,

We do not have a complete reference manual available at the moment, but we have been working on some brief programming guides based on the settings you are trying to configure. At the moment, are they primarily only interested in programming the retimer to lock to different data rates?

Thanks,

Michael

0 Toshiyuki over 11 years ago in reply to Michael Lu (Santa Clara)

Mastermind 7075 points

Hi Michael - san,

Yes, customer would like to know script example for the retimer locked data rates OUT1f.

In addition, they woud like to change different data rates, for example OUT1f to 10GbE in their system.

Best Regards,

kato

0 Michael Lu (Santa Clara) over 11 years ago in reply to Toshiyuki

TI__Mastermind 29655 points

Hi Kato-san,

I have realized that this post has been left open for the past several weeks. I apologize that we missed this post.

Does the customer still require guidance to change data rates? The datasheet has several useful step-by-step guides in the DS125DF111 datasheet for programming different data rates (p. 22-23) that can be changed to scripting examples.

Thanks,

Michael

Interface

Interface forum

DS125DF111 / Programming Guide