Dear all
In datasheet page13, td8 is written as "Delay time, address valid to \IOR".
But, In Fig. 12 of page16, td8 is the time from address to CSx.
Is Fig.12 an error?
Regards,
PAN-M
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Dear all
In datasheet page13, td8 is written as "Delay time, address valid to \IOR".
But, In Fig. 12 of page16, td8 is the time from address to CSx.
Is Fig.12 an error?
Regards,
PAN-M
Hi Pan-san,
I am going to move your question to the Consumer and Computing forum so that it can get the proper support and visibility. They should be able to address you question.
Thanks!
John
Hi Pan,
There is no mistake. It is a misunderstanding caused by the figure. If you take a look to td7 in the Timing Requirements (page 13), it is equal to 0 ns, so you could see /CSx and /IOR as the same. Therefore, in the figure 12 (page 16), td7 > 0ns causes a misundestanding.
Regards,
Aldo.