DS90UR241/DS90UR124 - relationship of TRFB/RRFB

Hiroshi Katsunaga

Mastermind 6480 points

Other Parts Discussed in Thread: DS90UR124, DS90UR241

Hello,

My customer has a question about DS90UR241 / DS90UR124.

[Q]

Are there the relations between setting of TRFB of DS90UR241 and setting of RRFB of DS90UR124 ?

(ex) If TRFB of DS90UR241 =H, then RRFB of DS90UR124 = L? or H?

I think these settngs are independent.

Best Regards,

Hiroshi Katsunaga

over 11 years ago

0 Jason Blackman over 11 years ago

TI__Genius 14015 points

Hello Hiroshi,

You are correct, TRFB and RRFB are independent. They can be the same, or opposite. It just depends on what the source is sending out at the SER side and what the receiver is expecting at the DES side.

Thanks,
Jason

0 Hiroshi Katsunaga over 11 years ago in reply to Jason Blackman

Mastermind 6480 points

Hi Jason-san,

Thank you for your fast response.

I understood.

Best Regards,

Hiroshi Katsunaga

Interface

Interface forum

DS90UR241/DS90UR124 - relationship of TRFB/RRFB