CAN tranciever for CAN FD

K.Yaita

Guru 29720 points

Other Parts Discussed in Thread: SN65HVD266, SN65HVD267, SN65HVD265

Hi Team,

Does TI have CAN tranciever that corresponds to CAN FD(CAN with Flexible Data Rate)?

I' d like to replace UJA1162TK.

http://www.jp.nxp.com/products/automotive/transceivers/can_transceivers/UJA1162TK.html

Automotive grade(AEC-Q100) is also required.

Best Regards,

Yaita

over 11 years ago

0 John Griffith over 11 years ago

TI__Mastermind 21992 points

Hi Yaita-san,

Currently TI does not have any CAN transceivers that would be drop in compatible with the UJA1162 (14-pin HVSON package). These parts are currently on the roadmap but will not be released for more than 1 year. Does the opportunity require the exact same footprint?

Thank you for your question,

John

0 K.Yaita over 11 years ago in reply to John Griffith

Guru 29720 points

John-san,

Thank you for your reply.

No, it doesn't require the exact same footprint.

I heard functional equivalence is required at this time.

Best Regards,

Yaita

0 John Griffith over 11 years ago in reply to K.Yaita

TI__Mastermind 21992 points

Yaita-san,

Thank you for your feedback. We are currently in development of our first automotive CAN FD transceivers, but it will be mid next year before these will be released.

Right now we only have a commercial FD CAN transceiver family (SN65HVD265, SN65HVD266, SN65HVD267).

Are you looking for 2MBPS operation, or faster?

Thanks,

John

0 K.Yaita over 11 years ago in reply to John Griffith

Guru 29720 points

John-san,

Thank you for your precious information.

I will confirm the data rate and feed back to you later.

Best Regards,

Yaita

Interface

Interface forum

CAN tranciever for CAN FD