• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 400 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB926Q-Q1 / send the UART signal through I2C back channel

Ryuji
Guru 20090 points
Other Parts Discussed in Thread: DS90UB926Q-Q1

Hello,

Can I send the UART signal through  I2C back channel ?
Our customer would like to send the UART signal via DS90UB926Q-Q1.

Best Regards,
Ryuji Asaka

  • 0
    TI__Genius 14015 points

    Hi Ryuji,

    They could configure GPIO channels on 925/926 to send UART data back and forth. The GPIO channel from 925 to 926 would be sent as part of the high-speed serial data. The GPIO channel from 926 to 925 would be sent as part of the low-speed back channel.

    Thanks,
    Jason