SN75DP130 - eDP support

Kawai

Guru 19785 points

Other Parts Discussed in Thread: SN75DP130

Hi Team,

I have two questions about SN75DP130.

[Q1]
I understand SN75DP130 is a DP repeater, but, could this device also support eDP ?

[Q2]
If answer of Q1 is YES, could the device support Fast Link Training ?

Best Regards,
Kawai

over 11 years ago

0 Diego Cortes over 11 years ago

TI__Mastermind 36085 points

Hello Kawai-san,

I think that the SN75DP130 can handle eDP since it is the same electrical spec, however I am not sure about the Link trainning. Please give me some time to review this.

Regards,

Diego.

0 Diego Cortes over 11 years ago in reply to Diego Cortes

TI__Mastermind 36085 points

Hello Kawai-san,

Please provide an email to send you an application note for the eDP implementation of the SN75DP130.

Regards,

Diego.

0 Kawai over 11 years ago in reply to Diego Cortes

Guru 19785 points

Hi Diego-san,

I have sent you an e-mail. We greatly appreciate for your help.

Best Regards,
Kawai

0 Diego Cortes over 11 years ago in reply to Kawai

TI__Mastermind 36085 points

Addressed by email.

Regards,

Diego.

0 Dario Pennisi over 10 years ago in reply to Diego Cortes

Prodigy 95 points

hi, can also have the application note? we're having issues enabling outputs when doing eDP fast link training.
thanks,

Dario

0 Moises Garcia over 10 years ago in reply to Dario Pennisi

TI__Mastermind 23815 points

Hi Dario,

Application note will be sent by email.

Regards

Interface

Interface forum

SN75DP130 - eDP support