DS16EV51-AEVKH: Confirm the AC/DC power adapter jack size

Kaka

Guru 24520 points

Hi community member.

Please let me confirm the following question.

[Question]

Would you please teach me the AC/DC power adapter jack size?

* I checked the user guide of this, however there are two size jacks(1.8mm and 1.5mm ) on this document.

Thus, which is correct?

Best regards.

Kaka

over 10 years ago

0 T.K. Chin over 10 years ago

TI__Expert 3175 points

Hi Kaka-san,

Sorry for the late reply.

I checked the BOM, J3 is shown as a DC Power Jack, 1.8mm.

Because of safety regulatory requirement, we no longer include the power adaptor in the EVM kit.

regards,

TK Chin

0 Kaka over 10 years ago in reply to T.K. Chin

Guru 24520 points

Hi TK Chin,

Thank you for your answer.

We will inform this information to customer if customer requests to show it to us.

Best regards.

Kaka

0 LGlen over 8 years ago in reply to T.K. Chin

Prodigy 30 points

TK Chin,

Could you please provide the J3 part number used in the BOM? I would like to purchase a power adapter and the guide has conflicting information.

Thanks,

0 Nasser Mohammadi over 8 years ago in reply to LGlen

TI__Guru* 93670 points

Hi Kaka,

J3 is a 1.5mm DC Supply adaptor plug. Please note this depends on the 5V DC supply that you are using. I checked Digikey and there are several different types/vendors providing this connector.

Also, note J3 is optional. You can use J4 and apply 3.3V to bypass the DC supply regulator.

Regards,,nasser

Interface

Interface forum

DS16EV51-AEVKH: Confirm the AC/DC power adapter jack size