Reading TLK1501 output on PC

Suryakant Mulik

Prodigy 20 points

Other Parts Discussed in Thread: TLK1501

Hi,

I have a devie sending data using TLK1501 @ ~1gbps. Now, I want to read this data by Windows 7 PC.

Can I use gigabit ethernet card of Windows PC to do this? If not, what can be done? Any other interface can be used?

Thanks,

Suryakant

over 11 years ago

0 Aldo Acero over 11 years ago

TI__Intellectual 1805 points

Hi Suryakant,

Yes, you can as long as your card meets the requirements of our device (CML compatibility at the input, LVTTL compatibility at the output, that can handle 8b/10b protocol and that can work at that speed). Please refer to this link.

Regards,

Aldo.

0 Suryakant Mulik over 11 years ago in reply to Aldo Acero

Prodigy 20 points

Thanks, Aldo

Do you know of any such card which is available off the shelf? As of now, I would like to just buy it from market and proceed with reading the data

Thanks,

Suryakant

0 Aldo Acero over 11 years ago in reply to Suryakant Mulik

TI__Intellectual 1805 points

Hi Suryakant,

Any Ethernet card that supports 1000Base-T connection should be ok.

Regards,
Aldo.

Interface

Interface forum

Reading TLK1501 output on PC