• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 36 subscribers
  • Views 535 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Camera board for automation application

Bohdan Jedlicka
Expert 1265 points

Other Parts Discussed in Thread: TIDA-00098

Hi All

I would need to test some reference design "Automotive camera over coax". Does  anybody know where to buy camera board module with Omnivision sensor or Aptina sensor for this reference design?
Thank you.

  • 0
    TI__Expert 5210 points
    Hi Bohdan,

    The reference design for this board is seen below. I have not seen the camera board module offered separately from the bundle.

    http://www.ti.com/tool/tida-00098

    The Aptina image sensor however, can be found on Aptina's website as shown below:

    https://www.aptina.com/products/image_sensors/ar0132at/

    -Sean
  • 0 in reply to Sean Thornton1
    Expert 1265 points
    Hi

    In schematic and BOM there is MI1000 marked like image sensor. It is not exist in Aptina Image sensors offer. May be it is demo camera module from Aptina. In any case reference design TIDA-00098 do not see well.