DP83848C interfacing with PC

Pravin Raut

Prodigy 40 points

Other Parts Discussed in Thread: DP83848C

Dear Friends,

I am using DP83848C ethernet PHY with my processor.

I able to communicate with DP83848C with MIIM interface through MDC and MDIO pins.

Now i am trying to communicate with PC.

What is the basic DP83848C register setting to communicate with PC.

Or any basic software to test DP83848C through LAN cable.

over 10 years ago

0 Patrick OFarrell over 10 years ago

TI__Mastermind 31600 points

The default strap configuration of the DP83848 is sufficient to achieve a link for the majority of applications. When connecting to a partner via the LAN cable, are you able to link?

What processor are you using? What capabilities does it have for communication?

Patrick

0 Pravin Raut over 10 years ago in reply to Patrick OFarrell

Prodigy 40 points

Thanks for replay.

I am using LPC2478 NXP processor.

When I am connecting to Laptop LAN socket, then link is established successfully.

Interface

Interface forum

DP83848C interfacing with PC