DS90UR124Q with competitor's Serializer

K.Yaita

Other Parts Discussed in Thread: DS90UR124

Hi Team,

Is it possible for DS90UR124Q(Deserializer) to receive data if Serializer is competitor's device(not DS90UR241Q)?
My customer assumes Serializer for MAX9273.
http://datasheets.maximintegrated.com/en/ds/MAX9273.pdf
Is there any concern about this combination?

Your support would be appreciated.

Best Regards,
Yaita / Japan disty

over 10 years ago

0 Mark Sauerwald88474 over 10 years ago

TI__Genius 13475 points

Yaita-san
The formats of the serialized streams of both the MAX9273 and the DS90UR124 are proprietary and different, so they cannot be intermixed on the serial side.

0 K.Yaita over 10 years ago in reply to Mark Sauerwald88474

Guru 29720 points

Hi Mark-san,

Thank you for your answer. I would like to ask more just in case.

If my customer use the camera that adopt GMSL Serializer(ex.MAX9273), I understood there is no TI Deserializer to link-up.
Is my understanding correct?

Best Regards,
Yaita

0 K.Yaita over 10 years ago in reply to K.Yaita

Guru 29720 points

Could you give me your comment please?

Best Regards,
Yaita

0 Sean Thornton1 over 10 years ago in reply to K.Yaita

TI__Expert 5210 points

Hello Yaita-san,

Yes, your understanding is correct.

-Sean

0 K.Yaita over 10 years ago in reply to Sean Thornton1

Guru 29720 points

Hi Sean-san,

Thank you for confirming.
I appreciate for your support.

Best Regards,
Yaita

Interface

Interface forum

DS90UR124Q with competitor's Serializer