Simulation model

Brad Safranski

Hello E2E Community,

Much like my recent question in the Data Converters forum, for this post I am wondering if there is a simulation model for the TLK2711 or similar part that can be used with a simulation such as ModelSim.

Thanks,

-Brad

over 10 years ago

0 Aldo Acero over 10 years ago

TI__Intellectual 1805 points

Hi Brad,

We have the IBIS model:

www.ti.com/.../toolssoftware

But I don't know if ModelSim supports it. Give it a try please.

Regards,
Aldo.

0 Wade Vonbergen over 10 years ago in reply to Aldo Acero

TI__Guru 62930 points

Brad,
Please see this post.
e2e.ti.com/.../543699
-Regards,
Wade

0 Brad Safranski over 10 years ago in reply to Wade Vonbergen

Prodigy 50 points

Thanks a lot!
-Brad

Interface

Interface forum

Simulation model