• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 553 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

cascading two repeater DS80PCI102 or DS125BR111

Kamal Najmi
Expert 3435 points
Other Parts Discussed in Thread: DS125BR111, DS80PCI102

hi team,

 

Is it possible to cascade two repeater devices of DS80PCI102 or DS125BR111 for longer cable distances or must be one repeater in the middle of the transmission line.

 

regards

kamal

 

  • 0
    TI__Guru* 93670 points
    Hi Kamal,

    You can cascade these two devices but one should be in the middle in order to boost the attenuated signal . If you put two of these devices next to one another the signal on 2nd part is already strong and there is no need for boosting or equalization(in a way the 2nd device is not adding value). So please use the second device in the middle.

    Regards,,nasser