Looking for Demo Application - TCA8418

Hook arm

Other Parts Discussed in Thread: TCA8418, TCA8418E-EVM, TCA8418E

We are using TCA8418 as keypad controller, but we found that the MAVRK project are not available any more, is there any one who can forward me a copy of the Demo Application - TCA8418?

Many thanks

Ho Arm

over 11 years ago

0 Rajan Arora over 11 years ago

TI__Intellectual 2175 points

Ho,
Let me check and get back to you.

Thanks,
Rajan

0 Hook arm over 11 years ago in reply to Rajan Arora

Prodigy 75 points

Dear Rajan,

thank you very much. If you happen have one, could you please forward me a copy of the demo code of TCA8418 to email: hookarm@gmail.com?

many thanks

Ho

0 Rajan Arora over 11 years ago in reply to Hook arm

TI__Intellectual 2175 points

Hi Ho,
TI does not support MAVRK any more. However, if you need code for TCA8418 can you use the EVM firmware code on this webpage? (www.ti.com/.../tca8418e-evm)

Thanks,
Rajan

0 Hook arm over 11 years ago in reply to Rajan Arora

Prodigy 75 points

Thanks Rajan, the website provides some test exe for the MSP430 application, but doesn't provide the demo code for TCA8418e-evm, I found TI prvoided the demo code for TCA8418/TCA8418e before, but the MARVK project is not available any more and I am not able to download the demo code for TCA8418 both for CCS or IAR. So, could you instruct me?

Many thanks

Ho

0 STEPHEN JIANG1 over 9 years ago

Prodigy 40 points

have you got the demo?could you share it with me?

0 Siby James over 9 years ago in reply to STEPHEN JIANG1

TI__Expert 5140 points

Hi Stephen,

Please refer to our EVM folder on ti.com (www.ti.com/.../tca8418e-evm ).

In the software section, there is EVM firmware and software available.

Thanks,
Siby

Interface

Interface forum

Looking for Demo Application - TCA8418