ISO 11452-9 related request on the pair of DS90UB913A and DS90UB914A

Izumi Maruyama

Hello,

A major automotive maker in Japan has been requested to get a test report of the ISO 11452-9 as the Portable transmitters part.

Do you have such test report? If you have, please send it to me asap. If no, please let me know you have a plan to do the test or not.

Best regards,

Izumi Maruyama

over 10 years ago

0 Sean Thornton1 over 10 years ago

TI__Expert 5210 points

Hello Izumi,

We completed the ISO 11452-4 qualification for our devices which is very similar to the one you stated above. The ISO 11452-4 qualification uses the bolt current injection (BCI) method instead.

A test report is available and can be shared with a customer under NDA.

-Sean

0 Izumi Maruyama over 10 years ago in reply to Sean Thornton1

TI__Intellectual 1350 points

Hi Sean,

I know a qualification report which says passed ISO 11452-4, CISPR 25 and ISO 7637-3, and I already disclosed the report to the customer. At moment they want to see a passed ISO 11452-9 report if you have. Of course, we have a NDA between the customer.

It’s ok if you don’t have the ISO 11452-9 report, I can say we don’t have and we didn’t try yet. Is this true? Let me know.

Best regards,

Izumi Maruyama

0 Sean Thornton1 over 10 years ago in reply to Izumi Maruyama

TI__Expert 5210 points

Hi Izumi,

Thank you for clarifying here. We do not have the ISO 11452-9 report as of yet.

-Sean

Interface

Interface forum

ISO 11452-9 related request on the pair of DS90UB913A and DS90UB914A