• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 374 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TUSB8041 / Power down sequence

S.Satoshi
Guru 21685 points
Other Parts Discussed in Thread: TUSB8041

Hi All,

I believe that there is no power down sequence for VDD and VDD33 of TUSB8041. Then is there possible of stress or damage if either VDD or VDD33 shut-off due to power supply problem will be happened?

Your comment will be appreciated.

Best Regards,

Sonoki / Japan Disty

  • 0
    TI__Genius 16150 points

    Hi Sonoki,

    The TUSB8041 does not have a specific power -off sequencing requirements with respect to VDD (core power) or I/O & VDD33 (analog power), although is recommended that this device operates to the recommended conditions, and it is likely that if the power supply fails continuously, maybe the device could be damaged.

    Also, it is important to mention that depending of the problem presented by the power supply, e.g. overshooting likely will damage the device, in case that just the power supply shut-off is needed Power-Up and Reset Sequence (Sec 9.3.7 datasheet TUSB8041).


    Regards!
    Luis Omar Morán Serna
    High Speed Interface Group
    SWAT Team