HSIC to USB HUB

vishnu hariharan

Prodigy 50 points

Hi There,

I'm looking for a HSIC to USB HUB 2/4 ports. (all are USB 2.0 hosts)

Any suggestions?

Thanks

Vishnu

over 10 years ago

0 Elias Villegas M. over 10 years ago

TI__Guru* 76130 points

Hello,

We have a number of USB full-speed and USB3.0 hubs, we will have available a USB2.0 Hub soon.
Can you elaborate more on your implementation?

www.ti.com/.../usb-overview.page

Regards

0 vishnu hariharan over 10 years ago in reply to Elias Villegas M.

Prodigy 50 points

Hi Elias,

Thanks for the link.

The uP I'm using has USB High Speed Inter chip (HSIC), but my devices don't support HSIC.

So all I need is a HSIC to multiple USB 2.0 full speed host ports converter.

Looking for a TI chip which can do the same.

Regards

Vishnu

0 Bhaumik Darji over 10 years ago in reply to vishnu hariharan

Intellectual 345 points

Hello Vishnu,

It looks to me that you are looking for USB2.0 Hub which support HSIC interface on up-stream port. I think you are planning to connect that hub to Micro-processor via HSIC interface. In that case, you will have multiple USB ports available where you can connect different USB devices. These devices will be detected by USB host running on micro-processor.

As per my knowledge, TI does not have such hub. But you can search on net. You will be able to find USB2.0 Hub chip with HSIC interface support.

Cheers,

Bhaumik

0 vishnu hariharan over 10 years ago in reply to Bhaumik Darji

Prodigy 50 points

Exactly Bhaumik!

Yes, i will check for other solutions.

Thanks Anyway

Vishnu

Interface

Interface forum

HSIC to USB HUB