SN75DP139 Reference Designs

Nabeel Khan

Other Parts Discussed in Thread: SN75DP139

Hi Team,

I was wondering if you had any layouts/reference designs for the SN75DP139. Our customer is using this device to convert their DP++ signals to HDMI signals and would like to know the best way to route the signal pairs in/out of the chip, as well as how to connect the SCL signals.

Thanks for your help!

Nabeel

over 10 years ago

0 Elias Villegas M. over 10 years ago

TI__Guru* 76130 points

Hello Nabeel,
I am sending you the files by email.
What package version do you need?

Regards

0 Nabeel Khan over 10 years ago in reply to Elias Villegas M.

TI__Intellectual 1455 points

Hey Elias,

VQFN48.

Thank you very much!

,Nabeel

0 Kenichi Nakatani over 10 years ago in reply to Nabeel Khan

Prodigy 20 points

Hi Nabeel-san

Could you please support us designing the SN75DP139 schematic ?

We would like to have the recommended schematic or reference designs information.

We are considering to use this device on our FPGA daughter.

B,R.
kenichi

0 WhiteHorse over 10 years ago in reply to Elias Villegas M.

Genius 4430 points

Hi Elias,

We have customer that needs a reference design as well. They are using the WQFN package. Can you email to me the files for that package please?

Thanks for your help.

Regards,
John Wiemeyer