• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 33 subscribers
  • Views 601 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS110DF111 GUI

Hung Huynh
Prodigy 20 points
Other Parts Discussed in Thread: DS110DF111, ALP, DS110DF410

Hi Team,

I'm using DS110DF111 for my project operates normally at 10Gb,

Could I use Analog LaunchPad GUI to config DS110DF111 and output eeprom file? I seen ALP in link: http://www.ti.com/tool/ALP 

  • 0
    TI__Mastermind 19235 points

    Hi,

    Yes, you may use the ALP GUI to create EEPROM files in HEX format as well as configure the DS110DF111 from EEPROM.You may refer to Section 3.7 (EEPROM Tab) of TI app note SNLU126A for info on EEPROM operations that can be executed with the ALP GUI. Though the SNLU126A document is for DS1xxDF410 family, its info on EEPROM is mostly applicable to the DS110DF111. Note that the DS110DF410 and DS110DF111 have different channel registers mappings, thus their EEPROM mappings will be different. But the EEPROM file formatting is generally the same. I'm including below the TI.com link for the SNLU126A application note. 

    www.ti.com/lit/pdf/snlu126a

    Cordially,
     
    Rodrigo Natal
     
    DPS Applications Engineer

  • 0 in reply to Rodrigo Natal
    Prodigy 20 points

    Thanks for your support

    Best Regards,

    Hung