• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 450 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPL0102 IDEAL RESISTANCE VALUES ISSUES.......

Rock Lai
Prodigy 40 points

Please refer to http://www.ti.com/lit/ds/symlink/tpl0102-100.pdf   p.16 (IDEAL RESISTANCE VALUES)

Resistance Formula:

RWL=Rtot*(D/256) ; RWH=Rtot*(1-(D/256))

When step=0, table shows RWL=100K, RWH=0 !!!!!!

I think that "RWL" and "RWH" should be changed, right ?!

  • 0
    TI__Genius 16510 points
    Hello,

    Thank you for your question.

    You are correct. We are aware of this mistake in the datasheet, and are actually updating this datasheet right now.

    When the code/step is 0, RWL = 0 and RHL = 100k. This is a typo in the datasheet.

    We appreciate you bringing this to our attention, and if you notice other datasheet mistakes, please post to e2e as you have done, and we will take actions to correct it.

    Regards,
    Jonathan