About IBIS-AMI model of DS125BR401

Gk 110

Other Parts Discussed in Thread: DS125BR401

Hello,

We want to get IBIS-AMI model of DS125BR401.

Information is following.

- Device name of the model you are requesting : DS125BR401
- Project details: CPU Board
- Describe how you will use the model :

   There application is VME Bus CPU Board.
   They will equip with a PCIe GEN2.
   They considering DS125BR401.
   So please provide IBIS-AMI Model.

Best regards,

Manabu Ito

over 10 years ago

0 Lee Sledjeski over 10 years ago

TI__Mastermind 43795 points

Hi Manabu,

In order to distribute our IBIS AMI models for high speed devices the SVA product line requires an NDA with the customer. If the customer already has an NDA, I can send them the model directly.

If there is no NDA in place, a good solution to simulate with the TI devices while an NDA is being processed is to use the on-line simulation tool WEBENCH® Interface Designer tool. This interface allows you to input your s4p files directly and do first-pass, IBIS AMI compliant simulations.

Regards,

Lee

0 Gk 110 over 10 years ago in reply to Lee Sledjeski

Expert 2440 points

Hello Lee-san

Thanks for your quick reply.

We immediately started the procedure to conclude the customer and the NDA.
However, our customer are in a hurry to start development.
Could you send me(or customer) a IBIS-AMI model in advance?

If possible,I will teach e-mail address of mine(or customer).

Best regards,

Manabu