About LVDS switch

Sho Ogane

Other Parts Discussed in Thread: HD3SS3412, HD3SS3415, HD3SS3212, HD3SS6126, HD3SS460

Hi all.

My customer looks for the differential 2:1 multiplexer LVDS switch like a PI3LVD1012(Pericom).
URL:https://www.pericom.com/products/signal-switch-ic-multiplexers/?part=PI3LVD1012

I show the configuration below.
In:Data0-A~Data4-A, CLK-A
DAta0-B~Data4-B, CLK-B
Out: 6 line to ASIC
Switch Block ×6

Please tell me such a device, if you have.

Best Regards,
Sho Ogane

over 10 years ago

0 Elias Villegas M. over 10 years ago

TI__Guru* 76130 points

Hello,
Please look at our FET switches portfolio here www.ti.com/.../universalsearch.tsp
, you will find there several options, start with the HD3SS3412

0 Jose Carlos Gil over 10 years ago

TI__Genius 9315 points

Hi Sho,

We don't have a 6 channel differential switch, what you can do is to use two HD3SS3412 or HD3SS3415 which are 4 differential channel switch.
Another configuration could be one HD3SS3412 or HD3SS3415 and one HD3SS3212 which is 4 differential channel plus 2 differential channel solution.

Regards.
JC

0 Sho Ogane over 10 years ago in reply to Jose Carlos Gil

Genius 5575 points

Hi Jose san

Thank you for your reply.

Sorry, I have one more question.
Does HD3SS6126 is compatible with LVDS?
Could this device be to be used in the configuration?

Best Regards,
Sho Ogane

0 Sho Ogane over 10 years ago in reply to Elias Villegas M.

Genius 5575 points

Hi Elias

Thank you for the reply.

I am looking for low data rate and low cost device like a HD3SS3421 or HD3SS3212.

If you know, please tell me such a device.

Best Regards,
Sho Ogane

0 Sho Ogane over 10 years ago in reply to Jose Carlos Gil

Genius 5575 points

Hi Jose.

I have one more question.

HD3SS460 has 4 MUXs for High speed and 2 MUXs for Low speed, total 6ch.
Could my customer make the system by 1 chip(HD3SS460) ?
The frequency is about 240kHz.

Best Regards,
Sho Ogane

Interface

Interface forum

About LVDS switch