I require footprint/ or complete dimensions for TPD4S214 for layout.
Request to provide the same. (The datasheet - http://www.ti.com/lit/ds/symlink/tpd4s214.pdf
Siddharth Gupta
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
I require footprint/ or complete dimensions for TPD4S214 for layout.
Request to provide the same. (The datasheet - http://www.ti.com/lit/ds/symlink/tpd4s214.pdf
Siddharth Gupta
Siddharth,
Use a solder mask expansion of 0.0254 mm (1 mil) with the attached mechanical data, which is inexplicably missing from the data sheet.
tpd4s214_Mech_Page.pdf
Regards,
Dear Sir,
Thankyou for the prompt reply. I appreciate your support. Request to include the footprint data\dimension in the next revision of TPD4S214 datasheet.
Siddharth Gupta
Hi,
Thank you for revising the datasheet. Manufacturing with TPDS4s214 is quiet challanging (layout constrains).
Kindly suggest an alternative in bigger package.
Siddharth Gupta
Hi,
I am looking for a single-chip protection solution for USB OTG ( a single chip alternative for TPD4S214- in bigger package).
Kindly suggest a single chip equivalent.
Siddharth