• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 33 subscribers
  • Views 813 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DP83867IR - Fast link loss < 10us

Hirotaka Matsumoto
Guru 27595 points

Other Parts Discussed in Thread: DP83867IR

Hi all

Would you mind if we ask DP83867IR?
Does this EtherPhy have Fast link detection mode for EtherCat?

Because, our customer would like to use EtherCat and 1G-Ethernet using one EtherPHY.
Is it possible?

Kind regards,

Hirotaka Matsumoto

  • 0
    TI__Mastermind 18425 points

    Hello Hirotaka-san,

    DP83867IR can support Fast Link Drop and Fast Link Detect. These modes can be configured via register access.  Fast Link Loss can be configured via FLD_CFG (0x002C) and FLD_THR_CFG (0x002D) registers. The link loss detection time is significantly reduced, in most cases less than 10us. There are separate sections dedicated to Fast Link Drop and Fast Link Detect in the datasheet. For best performance, it is recommended to implement these modes using DP83867 on both ends of the link.

     

    -Regards,

    Aniruddha Khadye

  • 0 in reply to Aniruddha Khadye
    Guru 27595 points

    Aniruddha san,

    Thank you for your reply!
    OK, as our recognition, it is avilable to use EtherCAT using DP83867IR.

    Kind regards,

    Hirotaka Matsumoto