• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 383 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

dS90ub928Q configuration

Patrick Chen
Mastermind 8875 points
Other Parts Discussed in Thread: DS90UB928Q

Hello,

                Does ds90ub928Q have any register to configure output driving capacity to panel due to the signal looks smaller about 400mV to panel? Thank you.

BR

Patrick

  • 0
    TI__Expert 5210 points

    Hello Patrick,


    There are no registers to configure output driving capacity in the UB928Q datasheet. The signals being driven out of the UB928Q LVDS outputs are approximately 400mV as you mentioned and for most panels, this is more than sufficient as a driving voltage.

    -Sean