Hi Team,
My customer considers to use DS92LV3221/2 but he thinks t_CIT spec is pretty strict.
Is there any recommended oscillator?
He would like to know it.
Best Regards,
Yaita / Japan disty
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team,
My customer considers to use DS92LV3221/2 but he thinks t_CIT spec is pretty strict.
Is there any recommended oscillator?
He would like to know it.
Best Regards,
Yaita / Japan disty
Hi Michael-san,
Thank you for your support.
It seems there is no reason that external oscillator is needed. It is just my customer's idea.
Is there any reference schematic or block diagram that includes FPGA or ASIC?
I think it is helpful for my customer.
Best Regards,
Yaita
Hi Yaita-san,
Nearly all of our reference schematics show how to design schematics and layouts for the serializer and deserializer products specifically.
There is one fairly complex reference design involving TI's automotive processor (Jacinto 6) that uses a SerDes pair from our automotive team, and this one uses a DS90UH925Q/926Q. Thus, input clock requirements to the serializer are comparable to the DS92LV3221. We can provide this reference design but only under an NDA.
Hope this helps.
Regards,
Michael
Hi Michael-san,
Thank you for your continuous support.
I would also like you to check my customer's schematic for DS92LV3221/DS92LV3222.
Could you send me the e-mail to the following address?
yaita-k@clv.macnica.co.jp
I would like to send the my customer's schematic on offline.
Best Regards,
Yaita / Japan disty