HD3SS215 HPD bandwidth

Patrick Chen(TPE System & Application)

Expert 3430 points

Other Parts Discussed in Thread: HD3SS215

Hi Sir,

Do you have HD3SS215 HPDA/B/C pin bandwidth information?

My customer would like to use it for MHL "CBUS" signal switch, which is a 1.88Gbps signal.

Could we use HD3SS215 HPD to support it?

Thanks,

Patrick

over 10 years ago

0 Diego Cortes over 10 years ago

TI__Mastermind 36085 points

Hello Patrick,

I am not an expert on MHL, could you share the CBUS signals details and the block diagram of how the customer would like to use the HD3SS215.

Regards,
Diego.

0 Patrick Chen(TPE System & Application) over 10 years ago in reply to Diego Cortes

TI__Expert 3430 points

Hi Diego,

Customer are ggoing to use it on the monitor, and they are going to use the HD3SS215 to switch HDMI connector and MHL connector to Scalar input.

The information about the CBUS I have is control BUS which have 1.88Gbps on it, and the information is coming from the customer.

Thanks.

0 Patrick Chen(TPE System & Application) over 10 years ago in reply to Patrick Chen(TPE System & Application)

TI__Expert 3430 points

Hi Diego,

Below is the information of CBUS. The CBUS data rate is 600MHz.

Please advise if the HPD of HD3SS215 could support it?

thanks,

Patrick

0 Diego Cortes over 10 years ago in reply to Patrick Chen(TPE System & Application)

TI__Mastermind 36085 points

Hello Patrick,

Please upload again the images, I thing there was an error during the upload and I am not able to see the pictures.

Regards,
Diego.

0 Patrick Chen(TPE System & Application) over 10 years ago in reply to Diego Cortes

TI__Expert 3430 points

Hi Diego,

attachment as above. i just want to know the bandwidth of HD3SS215 HPD pin.

Thanks,

Patrick

Interface

Interface forum

HD3SS215 HPD bandwidth