• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 490 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TUSB1310A / Power up and down sequence

S.Satoshi
Guru 21685 points

Other Parts Discussed in Thread: TUSB1310

Hi Everyone,

Please let me know the detail of power up and down sequence. I'd like to know which supply should be input first. Or is there no requirement between VDD1P1, VDD1P8, VDDA1P1, VDDA1P8 and VDDA3P3.

Best Regards,

Sonoki / Japan Disty

  • 0
    TI__Genius 11280 points

    Hello Sonoki,

    All TUSB1310 analog and digital power terminals must be controlled during the power-up and power-down sequence. Absolute maximum power terminal ratings must not be exceeded to prevent damaging the device. There is no requirement on which power rail be applied first nor does it matter which rail is removed first.

    Regards,

    Gerardo