Hello.
Please tell it about Loopback configuration Register(LOOPCR,address 0x00FE) register of P.81 of the DP83867IR data sheet.
Be written as 1110 0111 0010 000 to enter Loopback mode in these registers, but lack 1bit LSB.
Will it be sure to enter Loopback mode by writing in 1110 0111 0010 0000(0xE720)?
And is the value that I can write in at this register only a two value of 0xE720 or 0xE721?
Regards.
k-hashi.
