DS125DF111 / Reverse input to INx_P and INx_N

toshi-e2e

Other Parts Discussed in Thread: DS125DF111

Hi all,
my customer has a question about DS125DF111.

Question:
　　When I aim at the most suitable pattern wiring when mounting DS125DF111 on a present substrate,
　　p and n of differential inputs are connected reversely.
　　Would DS125DF111 normally operate about the all function?

Regards,
Toshi

over 9 years ago

0 Michael Lu (Santa Clara) over 9 years ago

TI__Mastermind 29655 points

Hi Toshi-san,

Yes, the DS125DF111 still functions normally if the p and n inputs are reversed. As long as the overall layout eventually switches back the polarity before reaching the end receiver, there are no issues expected.

Thanks,

Michael

Interface

Interface forum

DS125DF111 / Reverse input to INx_P and INx_N